Re: PPPoA Dialer <---> Virtual-Template

From: Brian Lee (ipgirl@gmail.com)
Date: Tue Jul 26 2005 - 10:33:34 GMT-3


What's the difference between the two aal5mux and aal5snap ?
I can't make it work with aal5mux.
Btw, how can virtual-template interface with different ip subnet can ping
each other ?

Lee.

----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "'B Kim'" <beokim@comcast.net>; "'CCIE Study Group'"
<ccielab@groupstudy.com>
Sent: Tuesday, July 26, 2005 6:38 PM
Subject: RE: PPPoA Dialer <---> Virtual-Template

> What happens if you use aal5mux as the encap on both sides?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of B
> Kim
> Sent: Monday, July 25, 2005 10:00 PM
> To: CCIE Study Group
> Subject: PPPoA Dialer <---> Virtual-Template
>
> Hi
>
> I think PPPoA configured by Dialer interface on end and by the
> Virtual-Template on the other end should work. But it doesn't in my lab
> work.
>
> Is it supposed to work or what is wrong with the configuration?
>
> Any comment would be appreciated. Thanks.
>
> R1:
> !
> interface ATM3/0
> no ip address
> no atm ilmi-keepalive
> pvc 0/101
> encapsulation aal5snap
> protocol ppp dialer
> dialer pool-member 1
> !
> !
> interface Dialer1
> ip address 10.1.12.1 255.255.255.0
> encapsulation ppp
> dialer pool 1
> !
>
> R2:
> !
> interface ATM3/0
> no ip address
> no atm ilmi-keepalive
> pvc 0/101
> encapsulation aal5snap
> protocol ppp Virtual-Template1
> !
> !
> interface Virtual-Template1
> ip address 10.1.12.2 255.255.255.0
> !
>
> P.S.
> When I configured the same type either Dialer or Virtual-Template on
> both sides, then it works.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3