From: Mathew (mathew@oztralia.com)
Date: Sat Aug 21 2004 - 22:54:06 GMT-3
Hi,
In Karl Solie's Practical Studies book page 507 (chapter 7 under dialer
watch), he has used the below config;
access-list 101 deny eigrp any any
access-list 101 permit ip any any
dialer watch-list 1 ip 175.10.102.1 255.255.255.255
dialer watch-list 1 ip 175.10.1.0 255.255.255.0
dialer-list 1 protocol ip list 101
I use the same config with OSPF routing (1st line eigrp replaced with
ospf) and it worked.
Also when I used the below dialer-list command, then also it worked well.
dialer-list 1 protocol ip deny
Can some explain to me what is the difference? maybe I am missing
something in understanding the use of the "dialer-list" command with
dialer watch.
mathew
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:47 GMT-3