From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Sun Jul 11 2004 - 14:30:09 GMT-3
I'm trying to bring a multilink with 2 channels at once by doing:
interface BRI0/0
ip address 172.30.25.2 255.255.255.0
encapsulation ppp
dialer map ip 172.30.25.5 name R5 broadcast 3333000
dialer map ip 172.30.25.5 name R5 broadcast 3333001
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 25633320000101 3332000
isdn spid2 25633320010101 3332001
ppp authentication chap
ppp multilink
multilink min-links 2
end
but when triggered, only one channel links, and the following error
shows up:
2d21h: BR0/0 DDR: Dialing cause ip (s=172.30.25.2, d=172.30.25.5)
2d21h: BR0/0 DDR: Attempting to dial 3333000
2d21h: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up.
2d21h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
2d21h: Vi1 DDR: Dialer statechange to up
2d21h: Vi1 DDR: Dialer call has been placed
2d21h: Vi1 DDR: dialer protocol up
2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
state to up
2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed state to up
2d21h: BR0/0 DDR: Attempting to dial 3333000
2d21h: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 3333000 R5
2d21h: BRI0/0: wait for isdn carrier timeout, call id=0x8041
2d21h: BR0/0 DDR: Already 1 call(s) in progress on BR0/0, dialing not
allowed
Where is this "already 1 call" limit coming from ?
Tried max-links 2 w/o success.
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:52 GMT-3