From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Sun Jul 11 2004 - 14:51:30 GMT-3
No good.
I know it helps sometimes, MPLS on 2500s ? :-)
But it seems this is not one of those cases. Same error.
I know I can change to profiles, but just wanted to nail this down :-(
Brian Dennis wrote:
> Carlos,
> I hate to give this kind of advice but try rebooting the router.
> Rebooting the router is the last gasp of a desperate engineer ;-)
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Carlos G Mendioroz
> Sent: Sunday, July 11, 2004 10:30 AM
> To: Group Study
> Subject: ISDN multilink dialer error
>
> I'm trying to bring a multilink with 2 channels at once by doing:
>
> interface BRI0/0
> ip address 172.30.25.2 255.255.255.0
> encapsulation ppp
> dialer map ip 172.30.25.5 name R5 broadcast 3333000
> dialer map ip 172.30.25.5 name R5 broadcast 3333001
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 25633320000101 3332000
> isdn spid2 25633320010101 3332001
> ppp authentication chap
> ppp multilink
> multilink min-links 2
> end
>
> but when triggered, only one channel links, and the following error
> shows up:
>
> 2d21h: BR0/0 DDR: Dialing cause ip (s=172.30.25.2, d=172.30.25.5)
> 2d21h: BR0/0 DDR: Attempting to dial 3333000
> 2d21h: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up.
> 2d21h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
> 2d21h: Vi1 DDR: Dialer statechange to up
> 2d21h: Vi1 DDR: Dialer call has been placed
> 2d21h: Vi1 DDR: dialer protocol up
> 2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
>
> state to up
> 2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
> changed state to up
> 2d21h: BR0/0 DDR: Attempting to dial 3333000
> 2d21h: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 3333000
> R5
> 2d21h: BRI0/0: wait for isdn carrier timeout, call id=0x8041
> 2d21h: BR0/0 DDR: Already 1 call(s) in progress on BR0/0, dialing not
> allowed
>
> Where is this "already 1 call" limit coming from ?
> Tried max-links 2 w/o success.
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:52 GMT-3