From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Sun Jul 11 2004 - 15:49:59 GMT-3
00:39:09: BR0/0 DDR: Dialing cause ip (s=172.30.25.2, d=172.30.25.5)
00:39:09: BR0/0 DDR: Attempting to dial 3333000
00:39:09: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x0D
00:39:09: Bearer Capability i = 0x8890
00:39:09: Channel ID i = 0x83
00:39:09: Called Party Number i = 0x80, '3333000', Plan:Unknown,
Type:Unknown
00:39:09: ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0x8D
00:39:09: Channel ID i = 0x89
00:39:09: ISDN BR0/0: RX <- CONNECT pd = 8 callref = 0x8D
00:39:09: Channel ID i = 0x89
00:39:09: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
00:39:09: ISDN BR0/0: TX -> CONNECT_ACK pd = 8 callref = 0x0D
00:39:10: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to
up.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 32/34/36 ms
R2#
00:39:10: Vi1 DDR: Dialer statechange to up
00:39:10: Vi1 DDR: Dialer call has been placed
00:39:10: Vi1 DDR: dialer protocol up
00:39:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1,
changed state to up
00:39:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Virtual-Access1, changed state to up
00:39:12: BR0/0 DDR: Attempting to dial 3333000
00:39:12: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x0E
00:39:12: Bearer Capability i = 0x8890
00:39:12: Channel ID i = 0x83
00:39:12: Called Party Number i = 0x80, '3333000', Plan:Unknown,
Type:Unknown
00:39:12: ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0x8E
00:39:12: Channel ID i = 0x8A
00:39:13: ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0x8E
00:39:13: Cause i = 0x8291 - User busy
00:39:13: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 3333000 R5
00:39:13: BRI0/0: wait for isdn carrier timeout, call id=0x800E
00:39:13: BR0/0 DDR: Already 1 call(s) in progress on BR0/0, dialing not
allowed
00:39:13: ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x0E
00:39:13: ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0x8E
00:39:42: BR0/0 DDR: Attempting to dial 3333000
00:39:42: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x0F
00:39:42: Bearer Capability i = 0x8890
00:39:42: Channel ID i = 0x83
00:39:42: Called Party Number i = 0x80, '3333000', Plan:Unknown,
Type:Unknown
00:39:43: ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0x8F
00:39:43: Channel ID i = 0x8A
00:39:43: ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0x8F
00:39:43: Cause i = 0x8291 - User busy
00:39:43: BRI0/0: wait for isdn carrier timeout, call id=0x800F
00:39:43: BR0/0 DDR: Already 1 call(s) in progress on BR0/0, dialing not
allowed
00:39:43: ISDN BR0/0: TX ->RELEASE pd = 8 callref = 0x0F
00:39:43: ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0x8F
Mema Dre wrote:
> Can you post your Q.931 trace
>
>
>
>
>> From: Carlos G Mendioroz <tron@huapi.ba.ar>
>> To: Mema Dre <dre_mema@hotmail.com>
>> CC: ccielab@groupstudy.com
>> Subject: Re: ISDN multilink dialer error
>> Date: Sun, 11 Jul 2004 15:39:15 -0300
>>
>> Dre Mema,
>> this is not always so, depends on your ISDN setup.
>> (And it is not so in this setup!)
>>
>> Router should jump to the second string if there was an error on first,
>> but is not doing so.
>>
>>
>> Mema Dre wrote:
>>
>>> keep only one if these two lines:
>>>
>>> dialer map ip 172.30.25.5 name R5 broadcast 3333000
>>> dialer map ip 172.30.25.5 name R5 broadcast 3333001
>>>
>>> does not matter which one. Because all the numbers in BRI are in hunt
>>> group you need only one dialer map. remove second for example and
>>> everytinh will be fine.
>>>
>>> Dre Mema
>>>
>>>
>>>
>>>
>>>> From: Carlos G Mendioroz <tron@huapi.ba.ar>
>>>> Reply-To: Carlos G Mendioroz <tron@huapi.ba.ar>
>>>> To: Group Study <ccielab@groupstudy.com>
>>>> Subject: ISDN multilink dialer error
>>>> Date: Sun, 11 Jul 2004 14:30:09 -0300
>>>>
>>>> I'm trying to bring a multilink with 2 channels at once by doing:
>>>>
>>>> interface BRI0/0
>>>> ip address 172.30.25.2 255.255.255.0
>>>> encapsulation ppp
>>>> dialer map ip 172.30.25.5 name R5 broadcast 3333000
>>>> dialer map ip 172.30.25.5 name R5 broadcast 3333001
>>>> dialer-group 1
>>>> isdn switch-type basic-dms100
>>>> isdn spid1 25633320000101 3332000
>>>> isdn spid2 25633320010101 3332001
>>>> ppp authentication chap
>>>> ppp multilink
>>>> multilink min-links 2
>>>> end
>>>>
>>>> but when triggered, only one channel links, and the following error
>>>> shows up:
>>>>
>>>> 2d21h: BR0/0 DDR: Dialing cause ip (s=172.30.25.2, d=172.30.25.5)
>>>> 2d21h: BR0/0 DDR: Attempting to dial 3333000
>>>> 2d21h: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up.
>>>> 2d21h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
>>>> 2d21h: Vi1 DDR: Dialer statechange to up
>>>> 2d21h: Vi1 DDR: Dialer call has been placed
>>>> 2d21h: Vi1 DDR: dialer protocol up
>>>> 2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1,
>>>> changed state to up
>>>> 2d21h: %LINEPROTO-5-UPDOWN: Line protocol on Interface
>>>> Virtual-Access1, changed state to up
>>>> 2d21h: BR0/0 DDR: Attempting to dial 3333000
>>>> 2d21h: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to
>>>> 3333000 R5
>>>> 2d21h: BRI0/0: wait for isdn carrier timeout, call id=0x8041
>>>> 2d21h: BR0/0 DDR: Already 1 call(s) in progress on BR0/0, dialing
>>>> not allowed
>>>>
>>>> Where is this "already 1 call" limit coming from ?
>>>> Tried max-links 2 w/o success.
>>>> --
>>>> Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
>>>>
>>>> _______________________________________________________________________
>>>> Please help support GroupStudy by purchasing your study materials from:
>>>> http://shop.groupstudy.com
>>>>
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>> _________________________________________________________________
>>> FREE pop-up blocking with the new MSN Toolbar get it now!
>>> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
>>>
>>>
>>
>> --
>> Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
>>
>
> _________________________________________________________________
> Is your PC infected? Get a FREE online computer virus scan from McAfee.
> Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:52 GMT-3