From: Ahmed Mustafa (ahmed.mustafa@sbcglobal.net)
Date: Wed Feb 25 2004 - 21:01:49 GMT-3
Is there anything other than simply use the following commands.
R1 and R6 are connected via ISIS Level-1 only.
on R6, I have a loopback interface 6 configured with 132.1.6.0/24, and I
redistributed via redistributed connected method.
r6
router isis
redistributed connected route-map connected2isis
route-map connected2isis permit 10
match interface loopback 6
But the route will not appear on R1.
Any advise !
Regards,
Ahmed
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:57 GMT-3