From: Scott, Tyson C (tyson.scott@hp.com)
Date: Wed Feb 25 2004 - 22:48:34 GMT-3
Did you try the two things I recommended
Either change your statement to
redistributed connected level-1 route-map connected2isis
or use passive-interface loopback6
These will work for you
Regards,
Tyson Scott
Agilent Problem Management Team
Managed Network Services
Phone: 313-583-5812
Pager: 877-997-0811
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ahmed Mustafa
Sent: Wednesday, February 25, 2004 8:45 PM
To: Bob Sinclair; ccielab@groupstudy.com
Subject: Re: redistribute Loopbacks
I tried with the metric option, but didn't work either. The reason I
didn't
think about metric because I am able to redisribute the ethernet
interfaces
w/o any problems, it is just the loopback that is giving me a grief.
----- Original Message -----
From: "Bob Sinclair" <bsinclair@netmasterclass.net>
To: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>;
<ccielab@groupstudy.com>
Sent: Wednesday, February 25, 2004 4:12 PM
Subject: Re: redistribute Loopbacks
> Ahmed,
>
> I believe that when redistributing INTO ISIS you need to add a metric
> between 1 and 63 on the redistribute command. . By default it comes
in
with
> metric 0 and acts like RIP or EGRP.
>
> Bob Sinclair
> CCIE #10427, CISSP, MCSE
> www.netmasterclass.net
>
> ----- Original Message -----
> From: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, February 25, 2004 7:01 PM
> Subject: redistribute Loopbacks
>
>
> > Is there anything other than simply use the following commands.
> >
> > R1 and R6 are connected via ISIS Level-1 only.
> >
> > on R6, I have a loopback interface 6 configured with 132.1.6.0/24,
and I
> > redistributed via redistributed connected method.
> >
> > r6
> >
> > router isis
> > redistributed connected route-map connected2isis
> >
> >
> > route-map connected2isis permit 10
> > match interface loopback 6
> >
> > But the route will not appear on R1.
> >
> > Any advise !
> >
> > Regards,
> >
> > Ahmed
> >
> >
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:57 GMT-3