From: Kumar, Senthil (senthil.kumar@intechnology.co.uk)
Date: Sat Jan 04 2003 - 15:43:40 GMT-3
can i have a frame-relay physical interface configured for connectivity-a
and a new sub-interface under the same physical for connectivity-b.
this is a working config, but is this something that cisco accepts if
used..any ideas..
int s0/0
encap frame-relay
ip add 100.100.100.1 255.255.255.0
ip ospf network point-to-multipoint
no frame-inarp
frame-relay map ip 100.100.100.2 200 broadcast
frame-relay map ip 100.100.100.3 300 broadcast
!
int s0/0.1
encap frame-relay
ip ospf net point-to-point
ip add 200.200.200.1 255.255.255.252
frame-relay interface-dlci 400
!
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3