DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment

From: MOLINA, MARTIN J (PBI) (mm1343@sbc.com)
Date: Tue Dec 03 2002 - 15:20:19 GMT-3

Next message: Ram Shummoogum: "NTP authentication"
Previous message: Rah Hussain: "RE: (Brief note of insanity from title) RE: Can't Add Nei"
Next in thread: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Teisberg, Evan: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: C. Warren: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Tom Young: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Nathan Chessin: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Scott Morris: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Jake Jake: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Erick B.: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Mahmud, Yasser: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Scott: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Solomon Ghebremariam: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Mahmud, Yasser: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,
I'm not sure this post will make it to the group since I have had trouble in
the past but here it goes:

If one were presented with the following requirement:
"Config R4 to peer to R2. Ensure that R2 never sends explorers for
4000.4000.4000 which is the only resource available through R4"
R2 and R4 are Ethernet only. My question is this- If I choose to configure a
DLSW ICANREACH statement on R4 to satisfy this requirement, should the
command be :
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 0200.0200.0200 mask ffff.ffff.ffff
or
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 4000.4000.4000 mask ffff.ffff.ffff
In other words, do I need to bit-swap in an Ethernet only environment?
Thanks in advance

Martin Molina
Senior Network Engineer
SBC (Pacific Bell) Internet Services
CCNP CCDP
desk: (925) 973-7774
cell: (925) 216-5299

Next message: Ram Shummoogum: "NTP authentication"
Previous message: Rah Hussain: "RE: (Brief note of insanity from title) RE: Can't Add Nei"
Next in thread: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Teisberg, Evan: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: C. Warren: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: MOLINA, MARTIN J (PBI): "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Tom Young: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Nathan Chessin: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Scott Morris: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Jake Jake: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Erick B.: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Mahmud, Yasser: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Scott: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Solomon Ghebremariam: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Maybe reply: Mahmud, Yasser: "RE: DLSW ICANREACH/ICANTREACH in a pure Ethernet Environment"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:38 GMT-3