From: Emmanuel Oppong (e-oppong@xxxxxxxxx)
Date: Mon Apr 22 2002 - 17:44:17 GMT-3
Hi folks. I am trying to setup SVC across a 3Com atm cloud. My atm-routers
are 7000 series running the following ios: rsp-ajsv56i-mz.120-9.bin and
gs7-p-mz.110-22a.bin. Below are the config.
I am able to establish a simple PVC across the 3com atm cloud and also the
routers can see the prefix portion of the atm nsap address. So I know the
switch works fine and communicates with the routers.
However, when I try to do svc, using the configs below I cannot ping between
r15 and r16. Am I missing something or the 3com atm switch is the problem?
On the 3com atm switch I have only configured the VPI/VCIs. Is there
anything else I need to configure on the 3com atm switch? IF YOU HAVE ANY
EXPERIENCE WITH THESE 3COM ATM SWITCHES, PLEASE HELP !!!
Thanks,
r15:
interface ATM4/0
ip address 100.100.100.1 255.255.255.0
map-group r15-r16
atm nsap-address 47.00000000003C0000A0000000.001500150015.00
atm pvc 1 0 5 qsaal
!
map-list r15-r16
ip 100.100.100.2 atm-nsap 47.00000000003C0000A0000000.001600160016.00
broadcast
!
R16:
interface ATM2/0
ip address 100.100.100.2 255.255.255.0
map-group r16-r15
atm nsap-address 47.00000000003C0000A0000000.001600160016.00
atm pvc 1 0 5 qsaal
!
map-list r16-r15
ip 100.100.100.1 atm-nsap 47.00000000003C0000A0000000.001500150015.00
broadcast
!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:17 GMT-3