From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Mon Apr 22 2002 - 17:59:28 GMT-3
I don't know anything about the 3com switches, but don't you need an ilmi
pvc in addition to the qsaal pvc for svc's to work properly? Usually it is
0/16.
~-----Original Message-----
~From: Emmanuel Oppong [mailto:e-oppong@attbi.com]
~Sent: Monday, April 22, 2002 4:44 PM
~To: ccielab@groupstudy.com
~Subject: ATM SVC Config & 3Com-ATM-Switch
~
~
~Hi folks. I am trying to setup SVC across a 3Com atm cloud.
~My atm-routers
~are 7000 series running the following ios: rsp-ajsv56i-mz.120-9.bin and
~gs7-p-mz.110-22a.bin. Below are the config.
~
~I am able to establish a simple PVC across the 3com atm cloud
~and also the
~routers can see the prefix portion of the atm nsap address.
~So I know the
~switch works fine and communicates with the routers.
~
~However, when I try to do svc, using the configs below I
~cannot ping between
~r15 and r16. Am I missing something or the 3com atm switch is
~the problem?
~On the 3com atm switch I have only configured the VPI/VCIs. Is there
~anything else I need to configure on the 3com atm switch? IF
~YOU HAVE ANY
~EXPERIENCE WITH THESE 3COM ATM SWITCHES, PLEASE HELP !!!
~
~Thanks,
~
~r15:
~interface ATM4/0
~ ip address 100.100.100.1 255.255.255.0
~ map-group r15-r16
~ atm nsap-address 47.00000000003C0000A0000000.001500150015.00
~ atm pvc 1 0 5 qsaal
~!
~map-list r15-r16
~ ip 100.100.100.2 atm-nsap 47.00000000003C0000A0000000.001600160016.00
~broadcast
~!
~
~
~R16:
~interface ATM2/0
~ ip address 100.100.100.2 255.255.255.0
~ map-group r16-r15
~ atm nsap-address 47.00000000003C0000A0000000.001600160016.00
~ atm pvc 1 0 5 qsaal
~!
~map-list r16-r15
~ ip 100.100.100.1 atm-nsap 47.00000000003C0000A0000000.001500150015.00
~broadcast
~!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:17 GMT-3