How to change route from O to IA in OSPF?

From: Joe Jia (ellenjjl@xxxxxxxxxx)
Date: Thu Apr 18 2002 - 23:55:30 GMT-3

   
Hi,
how to change the path at R2 to R1's ethernet0 from R2's serial0 to its
ethernet 0?
I have the case as following: R1,R2,R3 hub-spoke topology. R1 has ethernet0
and searial 0 at area 0
R2 has 64k serial0 and 10M ethernet interfaces, s0 in area0, ethernet0 in
area1
R3 has T1 serial0 and 10M ethernet interfaces, so in area 0 , ethernet 0 with
R2's e0 in area 1

I have the question, how can change R2's route to R1's ethernet0 from R2's
serial0 to Ethernet0 because this way has a low cost?

O , IA, E1, E2?

                            128.10.1.0/24
                           ______(e0)
                               |
                            (area0)
                              R1
                               |
                             (s0) 172.16.1.5/24
           (area0) / \ (area0)
                     64k / \ T1
                          / \
                       (s0) (s0)
    172.16.1.6/24 | | 172.16.1.1/24
                       R2 R3
                        | (e0) | (e0)
              (area1)|________| (area1)

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:12 GMT-3