DLSw question.

From: Babacar Diop (babacard2000@xxxxxxxxx)
Date: Thu Apr 18 2002 - 23:00:28 GMT-3

Next message: zhaozx@xxxxxxxxxxxxxxxx: "CCS11800,how to keep alive with Oralce server using script"
Previous message: Sean C.: "Re: Dialer watch questions"
Next in thread: Nick Shah: "Re: DLSw question."
Maybe reply: Nick Shah: "Re: DLSw question."
Maybe reply: Bruce Williams: "RE: DLSw question."
Maybe reply: Jason Sinclair: "RE: DLSw question."
Maybe reply: Babacar Diop: "RE: DLSw question."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have configured DLSw on two routers:

R5
Source-bridge ring-group 100
interface TokenRing0
ip address 133.14.33.1 255.255.255.0
ring-speed 16
source-bridge 10 1 100

R3
Source-bridge ring-group 100
interface TokenRing0
ip address 133.14.33.1 255.255.255.0
ring-speed 16

But everytime i applied "source-bridge 20 1 100" to
R3's T0 i get the follwing message on the console:

00:37:50: %TR-3-BADRNGNUM: Unit 0, ring number (20)
doesn't match established number (10).
00:37:50: %LANMGR-4-BADRNGNUM: Ring number mismatch on
TokenRing0, shutting down the interface
00:37:52: %LINK-5-CHANGED: Interface TokenRing0,
changed state to administratively down

Am i supposed to configure different virtual ring
numbers?

Thanks

Next message: zhaozx@xxxxxxxxxxxxxxxx: "CCS11800,how to keep alive with Oralce server using script"
Previous message: Sean C.: "Re: Dialer watch questions"
Next in thread: Nick Shah: "Re: DLSw question."
Maybe reply: Nick Shah: "Re: DLSw question."
Maybe reply: Bruce Williams: "RE: DLSw question."
Maybe reply: Jason Sinclair: "RE: DLSw question."
Maybe reply: Babacar Diop: "RE: DLSw question."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:12 GMT-3