From: Ahmed Mamoor (mamoor@xxxxxxxx)
Date: Thu Sep 13 2001 - 11:45:52 GMT-3
Hi all,
I have 3 routers with same problem can anyone help....
Problem:
Not getting any type of data from my 2501 router's console or AUX port.
observation:
1- When I power up the router Its goes apparently normal through the booting
process and after 30 sec. Light the GREEN OK light on the back of the
router.
2- When I attach WAN serial cable with my 2502 router with other one (2501 &
2503) after some sec the data is been send through the WAN serial cable as
these routers are sending keep alive packets to each other.
3- When I place a RS232 tester in between the router's console and the
computer serial port it gives all the signal except the Rx signal from the
router.
4- Console port is giving nothing but AUX port give a ASCII character when
power ups and nothing.
Solution Implemented and tested:
1- I check the router for every BAUD rate but no help.
2- I thought the routers power supply is not giving sufficient power to
router, I changed it with my other router's power supply but no help.
3- I changed FLASH and DRAM but nothing happened.
4- I changed the computers console cable with the original one and changed
computer too but no help.
5- I reset the routes jumper found just aside with ROM, thinking that IOS is
corrupted but nothing happened.
I am sure my router is not completely dead as it is giving packets through its
WAN interfaces when connected to other router. Any suggestion will be a great
help for me.
-Mamoor
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3