Re: ISIS over Frame Relay -

From: jonatale@xxxxxxxxxxxxx
Date: Thu Sep 13 2001 - 15:08:05 GMT-3

• Next message: McHie, Anthony: "HSRP load sharing with redundant circuits"
• Previous message: Ahmed Mamoor: "nothing is on the console.."
• Maybe in reply to: Piperw222@xxxxxxx: "ISIS over Frame Relay -"
• Next in thread: Raji Mohan: "Re: ISIS over Frame Relay -"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
There was a big discussion on this mailing list about 3 weeks ago -- I think
basically ISIS can only work over p2p and bcast/full-mesh, not over
NBMA/partial-mesh/hub-spoke.
        ccielab@groupstudy.com

Piperw222@aol.com wrote:

> Can anyone please post working configs for ISIS over Frame relay... Please
> let me know the configs for sub interface on the hub as well as without. I am
> having problems forming an adjacency over the Frame relay cloud. I need a
> very simple config for hub and spoke...
>
> I am also getting problems when configuring the area address and system id -
> I wanted to use the address of the Ethernet put when posted it into the
> router I got the following error message.
>
> %CLNS: System ID (0000.E01E.3E8C.00) must not change when defining additional
> area addresses
>
> Thanks,
>
> Lou
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: McHie, Anthony: "HSRP load sharing with redundant circuits"
• Previous message: Ahmed Mamoor: "nothing is on the console.."
• Maybe in reply to: Piperw222@xxxxxxx: "ISIS over Frame Relay -"
• Next in thread: Raji Mohan: "Re: ISIS over Frame Relay -"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3