From: windchong0008 (windchong0008@xxxxxxxxxxx)
Date: Sun Jun 03 2001 - 06:57:36 GMT-3
Hi all;
I have very interesting question that I want to discuss.
I set up an frame-realy Hub and spoke OSPF in my lab environment ( only 1
routing protocol).
r1- Hub (Cisco 2501, Enterprise Plus)
r2- Spoke (Cisco 2513, Enterprise Plus)
r3- Spoke (Cisco 2620, 1S, 1E, 1BRI, IP Plus)
r4- Spoke (Cisco 2511 IP Plus)
r5- Frame Relay Switch
When I was trying to distribute defualt route into OSPF domain by
the following command
" default-information originate always metric 100 metric-type 1
"into R2
The expected result is that, other router in the same OSPF domain will have
default route, metric 100 and type 1.
But I did not have the expected result, only type 2 distribute in other
router, try to adjust bandwidth, etc, .....
When I tried to implement the same configuration but differnet spoke
(2 & 4) the results was expected.
Any comment will welcome!
PS. All the spokes have similiar setting, except the one implement defualt
route ( 2 areas and 1 defualt route)
Vincent Chong
==================================================================
7s.v'K6O9q$l+H=c http://sinamail.sina.com.hk
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3