From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sun Jun 03 2001 - 14:56:11 GMT-3
Is there any redistribution with other routing protocols?
>From: "Ryan LaTorre" <cisco@crl.fdns.net>
>Reply-To: "Ryan LaTorre" <cisco@crl.fdns.net>
>To: "windchong0008" <windchong0008@sinaman.com>, "Groupstudy"
><ccielab@groupstudy.com>
>Subject: Re: Strange OSPF result
>Date: Sun, 3 Jun 2001 13:44:38 -0400
>
>I found that certain routers in my lab I experienced this as well. I
>suspect it's just an IOS quirk. Now, since you know the command you used
>doesn't work on that particular router, and you know the command is
>correct, what would you do next? If this happened in your lab test, you
>have to find a way to make it work...
>
>There are multiple ways to manipulate a route, perhaps a route-map might
>help here...
>
>----- Original Message -----
>From: "windchong0008" <windchong0008@sinaman.com>
>To: <ccielab@groupstudy.com>
>Sent: Sunday, June 03, 2001 5:57 AM
>Subject: Strange OSPF result
>
>
> > Hi all;
> >
> > I have very interesting question that I want to discuss.
> > I set up an frame-realy Hub and spoke OSPF in my lab environment (
>only 1
> > routing protocol).
> >
> > r1- Hub (Cisco 2501, Enterprise Plus)
> > r2- Spoke (Cisco 2513, Enterprise Plus)
> > r3- Spoke (Cisco 2620, 1S, 1E, 1BRI, IP Plus)
> > r4- Spoke (Cisco 2511 IP Plus)
> > r5- Frame Relay Switch
> >
> > When I was trying to distribute defualt route into OSPF domain
>by
> > the following command
> > " default-information originate always metric 100 metric-type
>1
> > "into R2
> >
> > The expected result is that, other router in the same OSPF domain will
>have
> > default route, metric 100 and type 1.
> > But I did not have the expected result, only type 2 distribute in
>other
> > router, try to adjust bandwidth, etc, .....
> >
> > When I tried to implement the same configuration but differnet
>spoke
> > (2 & 4) the results was expected.
> > Any comment will welcome!
> >
> > PS. All the spokes have similiar setting, except the one implement
>defualt
> > route ( 2 areas and 1 defualt route)
> >
> > Vincent Chong
> > ==================================================================
> > 7s.v'K6O9q$l+H=c http://sinamail.sina.com.hk
> > **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3