From: windchong0008 (windchong0008@xxxxxxxxxxx)
Date: Sun Jun 03 2001 - 15:11:23 GMT-3
Pure OSPF environmnet.
>
>Is there any redistribution with other routing protocols?
>
>>From: "Ryan LaTorre" <cisco@crl.fdns.net>
>>Reply-To: "Ryan LaTorre" <cisco@crl.fdns.net>
>>To: "windchong0008" <windchong0008@sinaman.com>, "Groupstudy"
>><ccielab@groupstudy.com>
>>Subject: Re: Strange OSPF result
>>Date: Sun, 3 Jun 2001 13:44:38 -0400
>>
>>I found that certain routers in my lab I experienced this as well. I
>>suspect it's just an IOS quirk. Now, since you know the command you used
>>doesn't work on that particular router, and you know the command is
>>correct, what would you do next? If this happened in your lab test, you
>>have to find a way to make it work...
>>
>>There are multiple ways to manipulate a route, perhaps a route-map might
>>help here...
>>
>>----- Original Message -----
>>From: "windchong0008" <windchong0008@sinaman.com>
>>To: <ccielab@groupstudy.com>
>>Sent: Sunday, June 03, 2001 5:57 AM
>>Subject: Strange OSPF result
>>
>>
>> > Hi all;
>> >
>> > I have very interesting question that I want to discuss.
>> > I set up an frame-realy Hub and spoke OSPF in my lab environment (
>>only 1
>> > routing protocol).
>> >
>> > r1- Hub (Cisco 2501, Enterprise Plus)
>> > r2- Spoke (Cisco 2513, Enterprise Plus)
>> > r3- Spoke (Cisco 2620, 1S, 1E, 1BRI, IP Plus)
>> > r4- Spoke (Cisco 2511 IP Plus)
>> > r5- Frame Relay Switch
>> >
>> > When I was trying to distribute defualt route into OSPF domain
>>by
>> > the following command
>> > " default-information originate always metric 100 metric-type
>>1
>> > "into R2
>> >
>> > The expected result is that, other router in the same OSPF domain will
>>have
>> > default route, metric 100 and type 1.
>> > But I did not have the expected result, only type 2 distribute in
>>other
>> > router, try to adjust bandwidth, etc, .....
>> >
>> > When I tried to implement the same configuration but differnet
>>spoke
>> > (2 & 4) the results was expected.
>> > Any comment will welcome!
>> >
>> > PS. All the spokes have similiar setting, except the one implement
>>defualt
>> > route ( 2 areas and 1 defualt route)
>> >
>> > Vincent Chong
>> > ==================================================================
>> > 7s.v'K6O9q$l+H=c http://sinamail.sina.com.hk
>> > **Please read:http://www.groupstudy.com/list/posting.html
>>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3