From: Cheong Kok Yong (kycheong@xxxxxxxxxxxxxx)
Date: Sun Jun 03 2001 - 05:37:32 GMT-3
Hi, pl look at the "sh ip os neig" in R5 & R6, the dead time column is "-"
for R6, but in R5, the dead time number is keep on displaying (resetting by
Hello), the config is having "ip ospf demand-circuit at one side" , after
the following scenario happen, I tried to put the demand-circuit command at
both router but the result is still the same, furthermore, this result is
achieve without any IGRP in place, just want to make sure that IGRP is no
the culprit at this moment.
Help!!
Cheong
r5#sh ip os ne
Neighbor ID Pri State Dead Time Address Interface
137.20.64.1 1 FULL/ - 00:00:39 137.20.48.2 BRI0
137.20.16.3 1 FULL/DR 00:00:39 137.20.16.3 Ethernet0
137.20.64.1 100 FULL/BDR 00:00:34 137.20.16.2 Ethernet0
137.20.3.33 1 FULL/ - 00:01:59 137.20.1.35 Serial0.1
200.200.200.1 1 FULL/ - 00:00:39 137.20.13.1 Serial1
r5#u
Terminal_Server#6
[Resuming connection 6 to r6 ... ]
r6#
r6#sh ip os ne
Neighbor ID Pri State Dead Time Address Interface
137.20.32.1 1 FULL/DROTHER 00:00:39 137.20.16.1
Ethernet0/0
137.20.16.3 1 FULL/DR 00:00:39 137.20.16.3
Ethernet0/0
137.20.32.1 1 FULL/ - - 137.20.48.1 BRI0/0
r6#
r5#sh ip os int bri0
BRI0 is up, line protocol is up (spoofing)
Internet Address 137.20.48.1/20, Area 0
Process ID 1, Router ID 137.20.32.1, Network Type POINT_TO_POINT, Cost:
1562
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 137.20.64.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
r5#u
Terminal_Server#6
[Resuming connection 6 to r6 ... ]
r6#sh ip os int bri0/0
BRI0/0 is up, line protocol is up (spoofing)
Internet Address 137.20.48.2/20, Area 0
Process ID 1, Router ID 137.20.64.1, Network Type POINT_TO_POINT, Cost:
1562
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:03
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 137.20.32.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
r6#
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3