From: Matt.Wilkerson@xxxxxxxxxx
Date: Tue May 15 2001 - 15:58:54 GMT-3
Hey all,
does anyone have any idea what this means. I've tried searching the cisco
website but can't find anything. I'm trying to get this isdn line to come up
but I'm not having a lot of luck. I'm pretty sure it's not the router,
because if I plug my other line into it, and change the spid, it comes right
up. But... I'm having problems explaining to the pbx guy here why this line
doesn't work.
Any input is greatly appreciated.
matt
R3#sho isdn stat
The current ISDN Switchtype = basic-5ess
ISDN BRI0 interface
Layer 1 Status:
ACTIVE_ErrorInd
Layer 2 Status:
TEI = 64, State = AWAITING_ESTABLISHMENT
Spid Status:
TEI 64, ces = 1, state = 3(await establishment)
spid1 configured, no LDN, spid1 sent, spid1 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB: callid=0x0, sapi=0, ces=1, B-chan=0
Total Allocated ISDN CCBs = 1
&&&&&&&&&&&&&&&&&&&
R3#debug isdn event
ISDN events debugging is on
R3#
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
ISDN BR0: L1 is IF_ACTIVE
ISDN BR0: Recvd MPH_EI1_IND from L1
##########################
R3#debug isdn q921
ISDN Q921 packets debugging is on
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
%ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 64 changed to down
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
%ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 64 changed to down
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
%%%%%%%%%%%%%%%%%%%%%%
$$$$$$$$$$$$$$$$$$$$$4
R3#sho run
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname R3
!
!
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-5ess
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
interface TokenRing0
ip address 10.10.10.1 255.255.255.0
ring-speed 16
!
interface BRI0
no ip address
isdn spid1 17690
!
router rip
network 10.0.0.0
!
ip classless
!
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
$$$$$$$$$$$$$$$$$$
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3