From: louie kouncar (lkouncar@xxxxxx)
Date: Tue May 15 2001 - 18:19:46 GMT-3
Mike,
Please correct me if I am wrong, but matt is saying that if he plugs in the
other isdn line that he already have, everything works fine, doesn't that
mean that the NT, Cable, WIC are working?
Thank you
Louie J. Kouncar
TCO3 Senior Data Center Engineer
UUNET
W-703-343-6645
C-703-304-2460
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Michael Davis
Sent: Tuesday, May 15, 2001 4:37 PM
To: Matt.Wilkerson@Level3.com; ccielab@groupstudy.com
Subject: Re: isdn line trouble
Hi Matt,
This usually means that the NT, cable, or WIC is bad. (Note the Layer 1
error) Since you've ruled out the WIC, try swapping cables, then NTs.
Mike
#7303
----- Original Message -----
From: <Matt.Wilkerson@Level3.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 15, 2001 2:58 PM
Subject: isdn line trouble
> Hey all,
>
> does anyone have any idea what this means. I've tried searching the cisco
> website but can't find anything. I'm trying to get this isdn line to come
up
> but I'm not having a lot of luck. I'm pretty sure it's not the router,
> because if I plug my other line into it, and change the spid, it comes
right
> up. But... I'm having problems explaining to the pbx guy here why this
line
> doesn't work.
>
> Any input is greatly appreciated.
> matt
>
>
>
>
> R3#sho isdn stat
> The current ISDN Switchtype = basic-5ess
> ISDN BRI0 interface
> Layer 1 Status:
> ACTIVE_ErrorInd
> Layer 2 Status:
> TEI = 64, State = AWAITING_ESTABLISHMENT
> Spid Status:
> TEI 64, ces = 1, state = 3(await establishment)
> spid1 configured, no LDN, spid1 sent, spid1 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 1
> CCB: callid=0x0, sapi=0, ces=1, B-chan=0
> Total Allocated ISDN CCBs = 1
>
> &&&&&&&&&&&&&&&&&&&
>
> R3#debug isdn event
> ISDN events debugging is on
> R3#
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
> ISDN BR0: L1 is IF_ACTIVE
> ISDN BR0: Recvd MPH_EI1_IND from L1
>
> ##########################
>
> R3#debug isdn q921
> ISDN Q921 packets debugging is on
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 64 changed to down
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 64 changed to down
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
> ISDN BR0: TX -> SABMEp sapi = 0 tei = 64
>
>
> %%%%%%%%%%%%%%%%%%%%%%
>
>
>
> $$$$$$$$$$$$$$$$$$$$$4
> R3#sho run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname R3
> !
> !
> ip subnet-zero
> no ip domain-lookup
> isdn switch-type basic-5ess
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface TokenRing0
> ip address 10.10.10.1 255.255.255.0
> ring-speed 16
> !
> interface BRI0
> no ip address
> isdn spid1 17690
> !
> router rip
> network 10.0.0.0
> !
> ip classless
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> line vty 0 4
> login
> !
> end
>
> $$$$$$$$$$$$$$$$$$
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3