From: Tim Ross (ross2k@xxxxxxxx)
Date: Tue Jan 23 2001 - 01:45:53 GMT-3
I've been attempting Voice for the first time recently. I bought a 2611 (on
eBay), and then bought a NM-2V and the FXS port elsewhere. I also bought a
1750-2V which came with the correct IOS for voice. I can dial the Pots lines
on the 2611, but the results are terrible. The voice quality sounds like
listening to gremlins talking to Charlie Brown's school teacher. I
downloaded several different IOS versions( for the 2600), but the recent
ones require 16 Meg Flash and 64 Meg DRAM. The 1750-2V sounds fine, but the
2600 sounds terrible. Even dialing one port to the other (local/on the 2611
router alone). I only have 8 Flash and 32 DRAM. Is there a version someone
can recommend that will support voice with this config? (8/32). I also have
(2) 924's (Cisco Cable modem with 2 voice ports) and have only had mixed
results with them. I can only get one of the ports to get a dial tone, etc.
Any IOS recommendations for them also?
Please, help me make the gremlins go away...
Tim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3