From: Tim Ross (ross2k@xxxxxxxx)
Date: Tue Jan 23 2001 - 04:04:52 GMT-3
Yes. My intention when setting up these routers was to have them as:
924--ether---2611--serial--1750-2V---ether---924
ph1-ph2 ph3-ph4 ph5-ph6 ph7-ph8
PC/Netmeeting PC/Netmeeting
Netmeeting would be on (2) separate PC's. One PC connected to the 2611 and
the other connected to the 1750-2V. I am interested in routing the POTS
calls and also how Netmeeting could route within the routers. Found some
good info at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/voice
_c/vcprt1/vcvoip.htm#xtocid1011336
I thought that the 2600 would work as easily as the 1750-2V, and I would
like to get the POTS problem solved before getting things more complex.
Tim
----- Original Message -----
From: "Robert DeVito" <robertdevito@hotmail.com>
To: <ross2k@pclv.com>; <ccielab@groupstudy.com>
Sent: Tuesday, January 23, 2001 5:18 AM
Subject: Re: Voice help please
> Do you get the same voice quality if you go ethernet back-to-back from
1750
> to 2611 and have nothing else configured?
>
> Robert
>
>
> ----Original Message Follows----
> From: "Tim Ross" <ross2k@pclv.com>
> Reply-To: "Tim Ross" <ross2k@pclv.com>
> To: <ccielab@groupstudy.com>
> Subject: Voice help please
> Date: Mon, 22 Jan 2001 20:45:53 -0800
>
> I've been attempting Voice for the first time recently. I bought a 2611
(on
> eBay), and then bought a NM-2V and the FXS port elsewhere. I also bought a
> 1750-2V which came with the correct IOS for voice. I can dial the Pots
lines
> on the 2611, but the results are terrible. The voice quality sounds like
> listening to gremlins talking to Charlie Brown's school teacher. I
> downloaded several different IOS versions( for the 2600), but the recent
> ones require 16 Meg Flash and 64 Meg DRAM. The 1750-2V sounds fine, but
the
> 2600 sounds terrible. Even dialing one port to the other (local/on the
2611
> router alone). I only have 8 Flash and 32 DRAM. Is there a version someone
> can recommend that will support voice with this config? (8/32). I also
have
> (2) 924's (Cisco Cable modem with 2 voice ports) and have only had mixed
> results with them. I can only get one of the ports to get a dial tone,
etc.
> Any IOS recommendations for them also?
>
> Please, help me make the gremlins go away...
> Tim
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3