From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Wed Jan 10 2001 - 01:17:58 GMT-3
if you have two DLSw remote peers configured on a router that has both a
token ring and an ethernet interface. One of the peers has a token ring
interface while the other has an ethernet interface. If the requirement is
that the bridging connectivity between the token rings should be independent
from the bridging connectivity between the ethernet segments then how can
this be achieved ?
Let me try to make this a little clear :
Router 1 --------- Router2 ---------- Router 3
| | | |
ether ether ring1 ring 2
Now if i have to configure dlsw between router1 and router 2 and then router
2 and router 3 and such that ether of router 1 should only be able to
connect to the ether of router 2 and ring 1 of router 2 should be only able
to connect to the ring 2 of router 3 and vice versa then how can this be
achieved ?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3