From: Wang, Kai (kai.wang@xxxxxxx)
Date: Thu Jun 08 2000 - 11:43:48 GMT-3
I am trying to configure LAT over F/R without using the protocol
translation. I am unable to get it to work.
The configs are shown as follows:
R4 config
!
interface Serial1
mac-address 0004.0004.0004
no ip address
encapsulation frame-relay
lat enabled
!
lat service TEST enabled
R3 config
!
interface Serial0
mac-address 0003.0003.0003
no ip address
encapsulation frame-relay
lat enabled
no fair-queue
I am getting the following error message from my router:
%LINK-3-BADMACREG: Interface Serial1, non-existent MACADDR registry for link
31
-Process= "LAT Timers", ipl= 0, pid= 29
-Traceback= 3451230 3450FB4 30F4892 363A7E4 363A986 364524C 363AB10
What should I do to get it to work?
Thank You!
Kai Wang
EDS - AHSMC/Network Operation
MS 3010
300 East Big Beaver
Troy, MI 48083
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3