From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Thu Jun 08 2000 - 12:31:00 GMT-3
The error is more indicative of an IOS problem with LAT timers than with a
configuration issue (which could still be the case, however). Send me a
"show version" from the router and I'll decode the traceback for you and
see if there might be a problem with the IOS code. No need to reply to the
whole list, I'll reply to everyone if I find something.
Brian
On Thu, 8 Jun 2000, Wang, Kai wrote:
> I am trying to configure LAT over F/R without using the protocol
> translation. I am unable to get it to work.
>
> The configs are shown as follows:
>
> R4 config
> !
> interface Serial1
> mac-address 0004.0004.0004
> no ip address
> encapsulation frame-relay
> lat enabled
> !
> lat service TEST enabled
>
> R3 config
> !
> interface Serial0
> mac-address 0003.0003.0003
> no ip address
> encapsulation frame-relay
> lat enabled
> no fair-queue
>
> I am getting the following error message from my router:
>
> %LINK-3-BADMACREG: Interface Serial1, non-existent MACADDR registry for link
> 31
> -Process= "LAT Timers", ipl= 0, pid= 29
> -Traceback= 3451230 3450FB4 30F4892 363A7E4 363A986 364524C 363AB10
>
> What should I do to get it to work?
>
> Thank You!
>
> Kai Wang
> EDS - AHSMC/Network Operation
> MS 3010
> 300 East Big Beaver
> Troy, MI 48083
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3