From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Thu Jun 08 2000 - 13:11:53 GMT-3
Please let me know how it goes after saving the config without the
mac-addr command and doing a reload. It could potentially have it in
memory still, just as frame pvc's are even after removing them from the
config and you have to reload the router to get rid of it.
I've decoded the traceback and the error was in frame encapsulation (the
top of the stack is the most recent function):
0x3451230:_fr_encaps(0x303932c+0x417de6)+0x11e
0x3450FB4:_fr_vencapsulate(0x303932c+0x417c6e)+0x1a
0x30F4892:_pak_encap(0x303932c+0xbb542)+0x24
0x363A7E4:_lat_pakout(0x303932c+0x601468)+0x50
0x363A986:_of_message(0x303932c+0x60153c)+0x11e
0x364524C:_toc_elapse(0x303932c+0x60be74)+0xac
0x363AB10:_lat_timer(0x303932c+0x601720)+0xc4
I'll try to see if I can find anything if I have some spare time today (I
test in less than three weeks... going nuts).
Brian
On Thu, 8 Jun 2000, Wang, Kai wrote:
> I removed the mac-address command. I am still getting the same error
> message.
>
> %LINK-3-BADMACREG: Interface Serial1, non-existent MACADDR registry for link
> 31
> -Process= "LAT Timers", ipl= 0, pid= 1
> -Traceback= 3451230 3450FB4 30F4892 363A7E4 363A986 364524C 363AB10
>
> -----Original Message-----
> From: Brian Hescock [mailto:bhescock@cisco.com]
> Sent: Thursday, June 08, 2000 11:44 AM
> To: Wang, Kai
> Cc: 'ccielab@groupstudy.com'
> Subject: Re: LAT over F/R
>
>
> Take off the mac-address command, the ios reference book indicates it's
> only used for token ring interfaces. I'm somewhat surprised you could
> configure it on a serial interface if it can only be used on token
> ring. I checked the lat configuration guide and there isn't anything in
> there about having to change the mac-address. The first error
> "BADMACREG" is probably related to the fact you tried changing the mac
> address. The second error is a traceback related to LAT Timers. The
> first error could have possibly caused the second error in the IOS code.
>
> Brian
>
> On Thu, 8 Jun 2000, Wang, Kai wrote:
>
> > I am trying to configure LAT over F/R without using the protocol
> > translation. I am unable to get it to work.
> >
> > The configs are shown as follows:
> >
> > R4 config
> > !
> > interface Serial1
> > mac-address 0004.0004.0004
> > no ip address
> > encapsulation frame-relay
> > lat enabled
> > !
> > lat service TEST enabled
> >
> > R3 config
> > !
> > interface Serial0
> > mac-address 0003.0003.0003
> > no ip address
> > encapsulation frame-relay
> > lat enabled
> > no fair-queue
> >
> > I am getting the following error message from my router:
> >
> > %LINK-3-BADMACREG: Interface Serial1, non-existent MACADDR registry for
> link
> > 31
> > -Process= "LAT Timers", ipl= 0, pid= 29
> > -Traceback= 3451230 3450FB4 30F4892 363A7E4 363A986 364524C 363AB10
> >
> > What should I do to get it to work?
> >
> > Thank You!
> >
> > Kai Wang
> > EDS - AHSMC/Network Operation
> > MS 3010
> > 300 East Big Beaver
> > Troy, MI 48083
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3