Re: Error on etherchanel on Cisco 6509

From: George J. Sanchez <marco207p_at_gmail.com>
Date: Tue, 20 Dec 2011 08:45:45 -0600

Glad you found the problem. Thanks

Regards,
 Joe Sanchez

On Dec 20, 2011, at 6:17 AM, "Thanh Tran" <thanhtran84_at_gmail.com> wrote:

> Dear Joe,
>
> Thanks for your reply.
> The error was solved, I found that the server which connect to the switch
> was using 2 different card (one is 4x1Gb, the other is 2x1Gb). I just
> connected 4 connections on the first card (4x1Gb) and remove the last
> connection from the other (2x1Gb). I think the different type of Ethernet
> card on the server made the problem.
>
>
> Regards,
>
> Thanh Tran
>
>
> -----Original Message-----
> From: George J. Sanchez [mailto:marco207p_at_gmail.com]
> Sent: Tuesday, December 20, 2011 2:12 PM
> To: Thanh Tran
> Cc: <ccielab_at_groupstudy.com>
> Subject: Re: Error on etherchanel on Cisco 6509
>
> Remove interface port channel config remove physical ports from
> channel-group command , default those Ports back to blank interface
> configuration..
>
> Go back into the physical interfaces you wish to bundle, put in your
> channel-group 23 mode active config... Create interface po23 and put in your
> configuration again. Do a show run int g6/x to see if everything from your
> PO was carrier into your physical port.
>
> Regards,
> Joe Sanchez
>
> On Dec 19, 2011, at 10:17 PM, "Thanh Tran" <thanhtran84_at_gmail.com> wrote:
>
>> Dear expert,
>>
>>
>>
>> I configured the ether-channel on 5 port G4/26 to 28 (slot 4) and
>> G6/13 to
>> 14 (slot 6) on Cisco 6509V-E. And it generated an error
>>
>> *Dec 20 04:05:33.639: %EC-SP-5-CANNOT_BUNDLE_LACP: Gi4/28 is not
>> compatible with aggregators in channel 32 and cannot attach to them
>> (flow control send of Gi4/28 is on, Gi4/27 is off)
>>
>>
>>
>> I try to turn on the flow control on G4/27, then it generated an
>> different error
>>
>> *Dec 20 04:05:33.639: %EC-SP-5-CANNOT_BUNDLE_LACP: Gi4/28 is not
>> compatible with aggregators in channel 32 and cannot attach to them
>> (flow control send of Gi4/27 is disagree , Gi4/28 is on)
>>
>>
>>
>> Could someone help?
>>
>>
>>
>> Thanks a lot.
>>
>>
>>
>> Regards,
>>
>>
>>
>> Thanh Tran
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> ______________________________________________________________________
>> _ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Dec 20 2011 - 08:45:45 ART

This archive was generated by hypermail 2.2.0 : Sun Jan 01 2012 - 08:27:00 ART