Y'all have any ideas why this is happening?
Aaron
-------------------------------------------------------------------------
R4#
*Mar 11 18:24:48.203: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired
R4#
*Mar 11 18:24:52.935: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done
R4#
*Mar 11 18:25:35.535: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired
R4#
*Mar 11 18:25:39.883: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done
R4#
*Mar 11 18:26:22.471: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired
R4#
*Mar 11 18:26:27.651: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done
R4#
*Mar 11 18:27:10.251: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired
R4#
*Mar 11 18:27:14.951: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done
-------------------------------------------------------------------------
R3#
*Mar 11 18:24:52.807: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done
R3#
*Mar 11 18:25:39.743: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done
R3#
*Mar 11 18:26:27.527: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done
R3#
*Mar 11 18:27:14.827: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done
R3#sh ip o n
-------------------------------------------------------------------------
R4#sh run in s1/0.1
Building configuration...
Current configuration : 140 bytes
!
interface Serial1/0.1 point-to-point
ip address 184.10.65.2 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 403
end
R4#
R4#sh run | be router ospf
router ospf 1
router-id 4.4.4.4
log-adjacency-changes
passive-interface default
no passive-interface Serial1/0.1
no passive-interface Serial1/0.2
network 184.10.65.2 0.0.0.0 area 20
-------------------------------------------------------------------------
R3#sh run in s1/0
Building configuration...
Current configuration : 326 bytes
!
interface Serial1/0
ip address 184.10.65.1 255.255.255.0
encapsulation frame-relay
ip ospf network point-to-multipoint
ip ospf hello-interval 10
ip ospf priority 10
serial restart-delay 0
no fair-queue
frame-relay map ip 184.10.65.3 301 broadcast
frame-relay map ip 184.10.65.2 304
no frame-relay inverse-arp
end
R3#
R3#sh run | be router ospf
router ospf 1
router-id 3.3.3.3
log-adjacency-changes
passive-interface default
no passive-interface Serial1/0
network 184.10.65.1 0.0.0.0 area 20
!
Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 11 2011 - 12:30:45 ART
This archive was generated by hypermail 2.2.0 : Fri Apr 01 2011 - 06:35:41 ART