Re: frame relay - ospf neighboring

Are you missing a "broadcast" statement on R3?

On Fri, Mar 11, 2011 at 6:30 PM, Aaron <aaron1_at_gvtc.com> wrote:

> Y'all have any ideas why this is happening?
>
>
>
> Aaron
>
> -------------------------------------------------------------------------
>
>
>
> R4#
>
> *Mar 11 18:24:48.203: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from FULL to DOWN, Neighbor Down: Dead timer expired
>
> R4#
>
> *Mar 11 18:24:52.935: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from LOADING to FULL, Loading Done
>
> R4#
>
> *Mar 11 18:25:35.535: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from FULL to DOWN, Neighbor Down: Dead timer expired
>
> R4#
>
> *Mar 11 18:25:39.883: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from LOADING to FULL, Loading Done
>
> R4#
>
> *Mar 11 18:26:22.471: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from FULL to DOWN, Neighbor Down: Dead timer expired
>
> R4#
>
> *Mar 11 18:26:27.651: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from LOADING to FULL, Loading Done
>
> R4#
>
> *Mar 11 18:27:10.251: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from FULL to DOWN, Neighbor Down: Dead timer expired
>
> R4#
>
> *Mar 11 18:27:14.951: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
> from LOADING to FULL, Loading Done
>
>
>
> -------------------------------------------------------------------------
>
>
>
>
>
> R3#
>
> *Mar 11 18:24:52.807: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
> from LOADING to FULL, Loading Done
>
> R3#
>
> *Mar 11 18:25:39.743: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
> from LOADING to FULL, Loading Done
>
> R3#
>
> *Mar 11 18:26:27.527: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
> from LOADING to FULL, Loading Done
>
> R3#
>
> *Mar 11 18:27:14.827: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
> from LOADING to FULL, Loading Done
>
> R3#sh ip o n
>
>
>
> -------------------------------------------------------------------------
>
>
>
>
>
> R4#sh run in s1/0.1
>
> Building configuration...
>
>
>
> Current configuration : 140 bytes
>
> !
>
> interface Serial1/0.1 point-to-point
>
> ip address 184.10.65.2 255.255.255.0
>
> snmp trap link-status
>
> frame-relay interface-dlci 403
>
> end
>
>
>
> R4#
>
> R4#sh run | be router ospf
>
> router ospf 1
>
> router-id 4.4.4.4
>
> log-adjacency-changes
>
> passive-interface default
>
> no passive-interface Serial1/0.1
>
> no passive-interface Serial1/0.2
>
> network 184.10.65.2 0.0.0.0 area 20
>
>
>
> -------------------------------------------------------------------------
>
>
>
>
>
> R3#sh run in s1/0
>
> Building configuration...
>
>
>
> Current configuration : 326 bytes
>
> !
>
> interface Serial1/0
>
> ip address 184.10.65.1 255.255.255.0
>
> encapsulation frame-relay
>
> ip ospf network point-to-multipoint
>
> ip ospf hello-interval 10
>
> ip ospf priority 10
>
> serial restart-delay 0
>
> no fair-queue
>
> frame-relay map ip 184.10.65.3 301 broadcast
>
> frame-relay map ip 184.10.65.2 304
>
> no frame-relay inverse-arp
>
> end
>
>
>
> R3#
>
> R3#sh run | be router ospf
>
> router ospf 1
>
> router-id 3.3.3.3
>
> log-adjacency-changes
>
> passive-interface default
>
> no passive-interface Serial1/0
>
> network 184.10.65.1 0.0.0.0 area 20
>
> !
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Nish
http://twitter.com/nish
Blogs and organic groups at http://www.ccie.net