RE: frame relay - ospf neighboring

Thanks Nish, that was it.

Aaron

From: Nish Vamadevan [mailto:ipnish_at_gmail.com]
Sent: Friday, March 11, 2011 12:38 PM
To: Aaron
Cc: Cisco certification
Subject: Re: frame relay - ospf neighboring

Are you missing a "broadcast" statement on R3?

On Fri, Mar 11, 2011 at 6:30 PM, Aaron <aaron1_at_gvtc.com> wrote:

Y'all have any ideas why this is happening?

Aaron

-------------------------------------------------------------------------

R4#

*Mar 11 18:24:48.203: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired

R4#

*Mar 11 18:24:52.935: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done

R4#

*Mar 11 18:25:35.535: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired

R4#

*Mar 11 18:25:39.883: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done

R4#

*Mar 11 18:26:22.471: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired

R4#

*Mar 11 18:26:27.651: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done

R4#

*Mar 11 18:27:10.251: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from FULL to DOWN, Neighbor Down: Dead timer expired

R4#

*Mar 11 18:27:14.951: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Serial1/0.1
from LOADING to FULL, Loading Done

-------------------------------------------------------------------------

R3#

*Mar 11 18:24:52.807: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done

R3#

*Mar 11 18:25:39.743: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done

R3#

*Mar 11 18:26:27.527: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done

R3#

*Mar 11 18:27:14.827: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on Serial1/0
from LOADING to FULL, Loading Done

R3#sh ip o n

-------------------------------------------------------------------------

R4#sh run in s1/0.1

Building configuration...

Current configuration : 140 bytes

!

interface Serial1/0.1 point-to-point

ip address 184.10.65.2 255.255.255.0

snmp trap link-status

frame-relay interface-dlci 403

end

R4#

R4#sh run | be router ospf

router ospf 1

router-id 4.4.4.4

log-adjacency-changes

passive-interface default

no passive-interface Serial1/0.1

no passive-interface Serial1/0.2

network 184.10.65.2 0.0.0.0 area 20

-------------------------------------------------------------------------

R3#sh run in s1/0

Building configuration...

Current configuration : 326 bytes

!

interface Serial1/0

ip address 184.10.65.1 255.255.255.0

encapsulation frame-relay

ip ospf network point-to-multipoint

ip ospf hello-interval 10

ip ospf priority 10

serial restart-delay 0

no fair-queue

frame-relay map ip 184.10.65.3 301 broadcast

frame-relay map ip 184.10.65.2 304

no frame-relay inverse-arp

end

R3#

R3#sh run | be router ospf

router ospf 1

router-id 3.3.3.3

log-adjacency-changes

passive-interface default

no passive-interface Serial1/0

network 184.10.65.1 0.0.0.0 area 20

!

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 11 2011 - 15:07:20 ART