RE: Service Provider: Searching for an IOS that supports L2TPv3

Move to 12.2(33)SR.

Lab Equipment and Operating System v2.0

http://www.cisco.com/web/learning/le3/ccie/sp/lab_equipment.html

Lab Equipment and Operating System v3.0 (April 18, 2011 or later)

https://learningnetwork.cisco.com/docs/DOC-10121

And check what you need to know to pass the lab:

https://learningnetwork.cisco.com/docs/DOC-10145

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
 <mailto:amsoares_at_netcabo.pt> amsoares_at_netcabo.pt

From: Ben Jules [mailto:bjules05_at_gmail.com]
Sent: quarta-feira, 24 de Novembro de 2010 19:52
To: Antonio Soares
Cc: ccielab_at_groupstudy.com
Subject: Re: Service Provider: Searching for an IOS that supports L2TPv3
over PPP

Thanks so Much!! This link is AWESOME!! I do use dynamips and I can' t wait
to LAB them all up. Truly a HAPPY THANKSGIVING!! I however don't think that
I will be able to download this recommended IOS since it's 12.2(25). I am
having a hard time finding these older IOS. I will search for it. Please let
me know if there are some comparable newer IOS just in case I can't find
this one.

Thanks again
Ben

On Wed, Nov 24, 2010 at 10:28 AM, Antonio Soares <amsoares_at_netcabo.pt>
wrote:

Try this image:

c7200-k91p.122-25.S13.bin

And check these examples:

http://www.ccie18473.net/dynamips/dynamips.htm

If you don't use dynamips, you can open the nvram files with wordpad and
check the configurations.

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Ben
Jules
Sent: quarta-feira, 24 de Novembro de 2010 14:24
To: ccielab_at_groupstudy.com
Subject: Service Provider: Searching for an IOS that supports L2TPv3 over
PPP

I am currently using IOS version 12.4(11)T1.

I have also tested IOS c7200-spservicesk9-mz.124-24.T4,
c3745-spservicesk9-mz.124-25d and c3745-spservicesk9-mz.124-15.T11 to name a
few. I also noticed in the documentation that the xconnect command is in
done in exec mode but I'm sure it's an interface mode command. Can someone
please give me a suggested IOS to test this? Or am I missing something.

Thanks Everyone

Ben

R8#sh ver
Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version
12.4(11)T1, RELEASE SOFTWARE (fc5)

http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrnt
<http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrn
t%0Awkg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1055221>
wkg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1055221

pseudowire-class ppp-fr
 encapsulation l2tpv3
 interworking ip
 ip local interface Loopback0

R8(config)#int s3/2
R8(config-if)#no ip address
R8(config-if)#encapsulation ppp
R8(config-if)#xconnect 10.2.2.2 1 pw-class ppp-fr
Interworking specified in pw-class is not supported on this interface

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 24 2010 - 23:27:40 ART