Re: Service Provider: Searching for an IOS that supports L2TPv3

Thanks so Much!! This link is AWESOME!! I do use dynamips and I can' t wait
to LAB them all up. Truly a HAPPY THANKSGIVING!! I however don't think that
I will be able to download this recommended IOS since it's 12.2(25). I am
having a hard time finding these older IOS. I will search for it. Please let
me know if there are some comparable newer IOS just in case I can't find
this one.

Thanks again
Ben

On Wed, Nov 24, 2010 at 10:28 AM, Antonio Soares <amsoares_at_netcabo.pt>wrote:

> Try this image:
>
> c7200-k91p.122-25.S13.bin
>
> And check these examples:
>
> http://www.ccie18473.net/dynamips/dynamips.htm
>
> If you don't use dynamips, you can open the nvram files with wordpad and
> check the configurations.
>
>
>
> Regards,
>
> Antonio Soares, CCIE #18473 (R&S/SP)
> amsoares_at_netcabo.pt
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Ben
> Jules
> Sent: quarta-feira, 24 de Novembro de 2010 14:24
> To: ccielab_at_groupstudy.com
> Subject: Service Provider: Searching for an IOS that supports L2TPv3 over
> PPP
>
> I am currently using IOS version 12.4(11)T1.
>
> I have also tested IOS c7200-spservicesk9-mz.124-24.T4,
> c3745-spservicesk9-mz.124-25d and c3745-spservicesk9-mz.124-15.T11 to name
> a
> few. I also noticed in the documentation that the xconnect command is in
> done in exec mode but I'm sure it's an interface mode command. Can someone
> please give me a suggested IOS to test this? Or am I missing something.
>
> Thanks Everyone
>
> Ben
>
> R8#sh ver
> Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version
> 12.4(11)T1, RELEASE SOFTWARE (fc5)
>
>
> http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrnt
> wkg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1055221<http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrnt%0Awkg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1055221>
>
> pseudowire-class ppp-fr
> encapsulation l2tpv3
> interworking ip
> ip local interface Loopback0
>
> R8(config)#int s3/2
> R8(config-if)#no ip address
> R8(config-if)#encapsulation ppp
> R8(config-if)#xconnect 10.2.2.2 1 pw-class ppp-fr
> Interworking specified in pw-class is not supported on this interface
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 24 2010 - 14:52:02 ART