Service Provider: Searching for an IOS that supports L2TPv3

I am currently using IOS version 12.4(11)T1.

I have also tested IOS c7200-spservicesk9-mz.124-24.T4,
c3745-spservicesk9-mz.124-25d and c3745-spservicesk9-mz.124-15.T11 to name a
few. I also noticed in the documentation that the xconnect command is in
done in exec mode but I'm sure it's an interface mode command. Can someone
please give me a suggested IOS to test this? Or am I missing something.

Thanks Everyone

Ben

R8#sh ver
Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version
12.4(11)T1, RELEASE SOFTWARE (fc5)

http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrntwkg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1055221

pseudowire-class ppp-fr
 encapsulation l2tpv3
 interworking ip
 ip local interface Loopback0

R8(config)#int s3/2
R8(config-if)#no ip address
R8(config-if)#encapsulation ppp
R8(config-if)#xconnect 10.2.2.2 1 pw-class ppp-fr
Interworking specified in pw-class is not supported on this interface

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 24 2010 - 09:24:27 ART