Re: PPPoFR Error

:

> Marko,
>
> I hadn't gotten that far yet. I will give that a try. On a side note can
> someone tell me what is wrong with this:
>
> R1---R4
>
> R1
> !
> username R4 password 0 R4
> !
> virtual-template 1
> ip address 150.200.200.1 255.255.255.0
> ppp multilink
> ppp authentication chap
> ppp chap hostname R1
> ppp chap password R1
>
> R4
> !
> username R1 password 0 R1
> !
> virtual-template 1
>
> ip address 150.200.200.4 255.255.255.0
> ppp multilink
> ppp authentication chap
> ppp chap hostname R4
> ppp chap password R4
>
>
> This is definitely an authentication problem, because when I remove "ppp
> authentication chap" the links come up.
>
> Thanks.
>
>
>
> On Tue, Oct 26, 2010 at 9:44 PM, Marko Milivojevic <markom_at_ipexpert.com>wrote:
>
>> Generally speaking, multilink PPPoFR requires R traffic-shaping to be
>> enabled. Have you tried doing it to get rid of the error?
>>
>> --
>> Marko Milivojevic - CCIE #18427
>> Senior Technical Instructor - IPexpert
>>
>> FREE CCIE training: http://bit.ly/vLecture
>>
>> Mailto: markom_at_ipexpert.com
>> Telephone: +1.810.326.1444
>> Web: http://www.ipexpert.com/
>>
>> On Wed, Oct 27, 2010 at 01:24, Steven Blasiol <steven.blasiol_at_gmail.com>
>> wrote:
>> > Experts,
>> >
>> > I am getting the following "error" when making a PPPoFR connection:
>> >
>> > *Mar 1 00:28:03.379: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
>> on
>> > Link Virtual-Access2 Bundle Virtual-Access3 :Frame Relay traffic shaping
>> > must be enabled
>> >
>> > This does not appear to be impacting the actual configuration as
>> everything
>> > works fine. Below is my configuration:
>> >
>> > interface Serial0/0
>> > ip address 150.100.24.4 255.255.255.0
>> > encapsulation frame-relay
>> > clock rate 2000000
>> > frame-relay interface-dlci 402
>> > frame-relay interface-dlci 412 ppp Virtual-Template1
>> > frame-relay lmi-type ansi
>> > !
>> > interface Virtual-Template1
>> > ip address 150.200.200.4 255.255.255.0
>> > ppp multilink
>> >
>> > The other end is the same, but opposite obviously. Is this normal, I am
>> > doing this in GNS3 so that might be the issue.
>> >
>> >
>> > --
>> > Steven M. Blasiol
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
> --
> Steven M. Blasiol
>

-- 
Steven M. Blasiol
Blogs and organic groups at http://www.ccie.net