PPPoFR Error

Experts,

I am getting the following "error" when making a PPPoFR connection:

*Mar 1 00:28:03.379: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access2 Bundle Virtual-Access3 :Frame Relay traffic shaping
must be enabled

This does not appear to be impacting the actual configuration as everything
works fine. Below is my configuration:

interface Serial0/0
 ip address 150.100.24.4 255.255.255.0
 encapsulation frame-relay
 clock rate 2000000
 frame-relay interface-dlci 402
 frame-relay interface-dlci 412 ppp Virtual-Template1
 frame-relay lmi-type ansi
!
interface Virtual-Template1
 ip address 150.200.200.4 255.255.255.0
 ppp multilink

The other end is the same, but opposite obviously. Is this normal, I am
doing this in GNS3 so that might be the issue.

-- 
Steven M. Blasiol
Blogs and organic groups at http://www.ccie.net