Re: PPPoFR Error

With chap and bidirectional challenge, the same password on both sides is
required.

Regards,
-mirco.

On Wed, Oct 27, 2010 at 4:42 AM, Steven Blasiol <steven.blasiol_at_gmail.com>wrote:

> :
>
> > Marko,
> >
> > I hadn't gotten that far yet. I will give that a try. On a side note
> can
> > someone tell me what is wrong with this:
> >
> > R1---R4
> >
> > R1
> > !
> > username R4 password 0 R4
> > !
> > virtual-template 1
> > ip address 150.200.200.1 255.255.255.0
> > ppp multilink
> > ppp authentication chap
> > ppp chap hostname R1
> > ppp chap password R1
> >
> > R4
> > !
> > username R1 password 0 R1
> > !
> > virtual-template 1
> >
> > ip address 150.200.200.4 255.255.255.0
> > ppp multilink
> > ppp authentication chap
> > ppp chap hostname R4
> > ppp chap password R4
> >
> >
> > This is definitely an authentication problem, because when I remove "ppp
> > authentication chap" the links come up.
> >
> > Thanks.
> >
> >
> >
> > On Tue, Oct 26, 2010 at 9:44 PM, Marko Milivojevic <markom_at_ipexpert.com
> >wrote:
> >
> >> Generally speaking, multilink PPPoFR requires R traffic-shaping to be
> >> enabled. Have you tried doing it to get rid of the error?
> >>
> >> --
> >> Marko Milivojevic - CCIE #18427
> >> Senior Technical Instructor - IPexpert
> >>
> >> FREE CCIE training: http://bit.ly/vLecture
> >>
> >> Mailto: markom_at_ipexpert.com
> >> Telephone: +1.810.326.1444
> >> Web: http://www.ipexpert.com/
> >>
> >> On Wed, Oct 27, 2010 at 01:24, Steven Blasiol <steven.blasiol_at_gmail.com
> >
> >> wrote:
> >> > Experts,
> >> >
> >> > I am getting the following "error" when making a PPPoFR connection:
> >> >
> >> > *Mar 1 00:28:03.379: %FR-3-MLPOFR_ERROR: MLPoFR not configured
> properly
> >> on
> >> > Link Virtual-Access2 Bundle Virtual-Access3 :Frame Relay traffic
> shaping
> >> > must be enabled
> >> >
> >> > This does not appear to be impacting the actual configuration as
> >> everything
> >> > works fine. Below is my configuration:
> >> >
> >> > interface Serial0/0
> >> > ip address 150.100.24.4 255.255.255.0
> >> > encapsulation frame-relay
> >> > clock rate 2000000
> >> > frame-relay interface-dlci 402
> >> > frame-relay interface-dlci 412 ppp Virtual-Template1
> >> > frame-relay lmi-type ansi
> >> > !
> >> > interface Virtual-Template1
> >> > ip address 150.200.200.4 255.255.255.0
> >> > ppp multilink
> >> >
> >> > The other end is the same, but opposite obviously. Is this normal, I
> am
> >> > doing this in GNS3 so that might be the issue.
> >> >
> >> >
> >> > --
> >> > Steven M. Blasiol
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >
> _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> > --
> > Steven M. Blasiol
> >
>
>
>
> --
> Steven M. Blasiol
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 27 2010 - 12:04:38 ART