Re: PPPoFR Error

Generally speaking, multilink PPPoFR requires R traffic-shaping to be
enabled. Have you tried doing it to get rid of the error?

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Wed, Oct 27, 2010 at 01:24, Steven Blasiol <steven.blasiol_at_gmail.com> wrote:
> Experts,
>
> I am getting the following "error" when making a PPPoFR connection:
>
> *Mar B 1 00:28:03.379: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
> Link Virtual-Access2 Bundle Virtual-Access3 :Frame Relay traffic shaping
> must be enabled
>
> This does not appear to be impacting the actual configuration as everything
> works fine. B Below is my configuration:
>
> interface Serial0/0
> B ip address 150.100.24.4 255.255.255.0
> B encapsulation frame-relay
> B clock rate 2000000
> B frame-relay interface-dlci 402
> B frame-relay interface-dlci 412 ppp Virtual-Template1
> B frame-relay lmi-type ansi
> !
> interface Virtual-Template1
> B ip address 150.200.200.4 255.255.255.0
> B ppp multilink
>
> The other end is the same, but opposite obviously. B Is this normal, I am
> doing this in GNS3 so that might be the issue.
>
>
> --
> Steven M. Blasiol
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net