Inverse-ARP with no LMI

Hi all

When I have the following config I have no problems with connectivity
and I can see inverse-arp requests and replies:

interface Serial1/0
 ip address 10.0.0.1 255.255.255.0
 encapsulation frame-relay IETF
 serial restart-delay 0
 frame-relay interface-dlci 102
end

However when I switch off LMI on the interface (below) I can only see
inverse-arp requests but no replies and so ping fails. Is inverse-arp
dependent on LMI?

interface Serial1/0
 ip address 10.0.0.1 255.255.255.0
 encapsulation frame-relay IETF
no keepalive
 serial restart-delay 0
 frame-relay interface-dlci 102
end

Thanks

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 17 2010 - 14:58:27 ART