Re: Frame-relay config in GNS3

I dont see any issue's with what you have done but you ALWAYS have to keep in mind that you are using GNS3... Forget about it and move on!

If you were having this issue with real hardware then it would be an issue.

On Aug 14, 2010, at 10:57 AM, Edward John wrote:

> Hi,
>
> All the time I configure frame-relay in GNS3, I couldn't filter the unwanted
> DLCI coming from the FRSW.. Can anyone verify whether my config is wrong?
>
> !
> interface Serial1/0
> ip address 34.1.24.4 255.255.255.0
> encapsulation frame-relay
> serial restart-delay 0
> no dce-terminal-timing-enable
> * no arp frame-relay*
> frame-relay map ip 34.1.24.2 402 broadcast
> frame-relay map ip 34.1.24.4 402
> frame-relay interface-dlci 402
> * no frame-relay inverse-arp*
> !
> Rack1R4#show frame-relay map
> Serial1/0 (up): ip 0.0.0.0 dlci 413(0x19D,0x64D0)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 405(0x195,0x6450)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 403(0x193,0x6430)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 402(0x192,0x6420)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 401(0x191,0x6410)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 34.1.24.2 dlci 402(0x192,0x6420), static,
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 34.1.24.4 dlci 402(0x192,0x6420), static,
> CISCO, status defined, active
> !
> Rack1R4#show frame-relay pvc | include DLCI
> DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 402, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 403, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 405, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 413, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> !
>
>
>
> I tried following actions, and result is negative
>
> After configuring the interface shut the interface, and ensured no more
> dynamic map & did no shut
> Restarted the router
>
>
>
> --
>
> *Regards,*
> *John*
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Aug 14 2010 - 11:05:03 ART