Re: Frame-relay config in GNS3

Hi Edward,

It looks like your routing is trying to invoke auto install as I can see
from your 0.0.0.0 maps. I had same issue last time, did you try to
create/delete any sub interfaces on frame relay.

Please correct me guys, if I am wrong.

Regards,

Bilal

On Sun, Aug 15, 2010 at 12:57 AM, Edward John <edwardjohn2020_at_googlemail.com
> wrote:

> Hi,
>
> All the time I configure frame-relay in GNS3, I couldn't filter the
> unwanted
> DLCI coming from the FRSW.. Can anyone verify whether my config is wrong?
>
> !
> interface Serial1/0
> ip address 34.1.24.4 255.255.255.0
> encapsulation frame-relay
> serial restart-delay 0
> no dce-terminal-timing-enable
> * no arp frame-relay*
> frame-relay map ip 34.1.24.2 402 broadcast
> frame-relay map ip 34.1.24.4 402
> frame-relay interface-dlci 402
> * no frame-relay inverse-arp*
> !
> Rack1R4#show frame-relay map
> Serial1/0 (up): ip 0.0.0.0 dlci 413(0x19D,0x64D0)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 405(0x195,0x6450)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 403(0x193,0x6430)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 402(0x192,0x6420)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 0.0.0.0 dlci 401(0x191,0x6410)
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 34.1.24.2 dlci 402(0x192,0x6420), static,
> broadcast,
> CISCO, status defined, active
> Serial1/0 (up): ip 34.1.24.4 dlci 402(0x192,0x6420), static,
> CISCO, status defined, active
> !
> Rack1R4#show frame-relay pvc | include DLCI
> DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 402, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 403, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 405, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> DLCI = 413, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0
> !
>
>
>
> I tried following actions, and result is negative
>
> After configuring the interface shut the interface, and ensured no more
> dynamic map & did no shut
> Restarted the router
>
>
>
> --
>
> *Regards,*
> *John*
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 15 2010 - 01:05:59 ART