Re: Cisco 3845 question

I think the issue can be QoS.
The 3845 can support 2 DS3s, but only limited QoS.....I can't look for
the doc at the moment, but I seem to remeber if u run 2 DS3s u are
significantly limited on other features.

Chris

On 8/13/10, Biggs, Jeff (M/CIO/BIE) <JBiggs_at_usaid.gov> wrote:
> Anyone seeing any issues with a 3845 chassis running two DS-3 modules?
>
> We have one of the DS-3's occasionally hit 40mb and causes the CPU on the
> router to hit 90% plus.
>
> Running 12.4(23) AdvEnterprise with 768Mb of memory.
>
> Cisco 3845 (revision 1.0) with 745472K/40960K bytes of memory.
> 4 FastEthernet interfaces
> 2 Gigabit Ethernet interfaces
> 2 Serial interfaces
> 1 Virtual Private Network (VPN) Module
> 2 Subrate T3/E3 ports
> DRAM configuration is 64 bits wide with parity enabled.
> 479K bytes of NVRAM.
> 255488K bytes of ATA System CompactFlash (Read/Write)
>
> Running NETFLOW (v5) and some LLQ, but that should not drive this box into
> meltdown.
> Any thoughts?
>
> Jeffrey Biggs
> CCIE #21127 (R&S)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sent from my mobile device
Blogs and organic groups at http://www.ccie.net