Re: Cisco 3845 question

Are you running anything like WCCP with and outbound redirect-list? The
reason I ask is that I have seen issues with WCCP configurations using
outbound redirects where the traffic get's punted to the CPU. Have you been
able to see which process is running at the time this occurs?

Steve

On Fri, Aug 13, 2010 at 3:12 PM, Biggs, Jeff (M/CIO/BIE)
<JBiggs_at_usaid.gov>wrote:

> Anyone seeing any issues with a 3845 chassis running two DS-3 modules?
>
> We have one of the DS-3's occasionally hit 40mb and causes the CPU on the
> router to hit 90% plus.
>
> Running 12.4(23) AdvEnterprise with 768Mb of memory.
>
> Cisco 3845 (revision 1.0) with 745472K/40960K bytes of memory.
> 4 FastEthernet interfaces
> 2 Gigabit Ethernet interfaces
> 2 Serial interfaces
> 1 Virtual Private Network (VPN) Module
> 2 Subrate T3/E3 ports
> DRAM configuration is 64 bits wide with parity enabled.
> 479K bytes of NVRAM.
> 255488K bytes of ATA System CompactFlash (Read/Write)
>
> Running NETFLOW (v5) and some LLQ, but that should not drive this box into
> meltdown.
> Any thoughts?
>
> Jeffrey Biggs
> CCIE #21127 (R&S)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
-Steve Di Bias
Blogs and organic groups at http://www.ccie.net