Re: Cisco 3845 question

I run a 3845 with around 45 Mbps through traffic. I have an ATM OC3
interface, ATM T1s, T1s, and Eth interfaces. I also have extremely complex
QOS policies, and filtering/NAT, 2k PPPoE sessions. That box never gets over
6-7% on the CPU load.

On Fri, Aug 13, 2010 at 2:12 PM, Biggs, Jeff (M/CIO/BIE)
<JBiggs_at_usaid.gov>wrote:

> Anyone seeing any issues with a 3845 chassis running two DS-3 modules?
>
> We have one of the DS-3's occasionally hit 40mb and causes the CPU on the
> router to hit 90% plus.
>
> Running 12.4(23) AdvEnterprise with 768Mb of memory.
>
> Cisco 3845 (revision 1.0) with 745472K/40960K bytes of memory.
> 4 FastEthernet interfaces
> 2 Gigabit Ethernet interfaces
> 2 Serial interfaces
> 1 Virtual Private Network (VPN) Module
> 2 Subrate T3/E3 ports
> DRAM configuration is 64 bits wide with parity enabled.
> 479K bytes of NVRAM.
> 255488K bytes of ATA System CompactFlash (Read/Write)
>
> Running NETFLOW (v5) and some LLQ, but that should not drive this box into
> meltdown.
> Any thoughts?
>
> Jeffrey Biggs
> CCIE #21127 (R&S)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 13 2010 - 15:42:37 ART