Re: ISIS route-leaking help..

Hmmm...Do you have metric-style wide on your routers in L2? Try that and if
that doesn't work post your configs.

On Tue, Jan 12, 2010 at 8:48 PM, JR Garcia <ttuner_at_gmail.com> wrote:

> I cant seem to get this to work.
> config below:
>
> router isis 1
> net 00.0000.0000.0001.00
> metric-style wide
> is-type level-1
> redistribute isis ip level-2 into level-1 distribute-list 102
> !
> router isis 2
> net 00.0000.0000.0002.00
> metric-style wide
> is-type level-2
> !
> access-list 102 permit ip any any
>
>
> according to the documentation, this is all the config necessary
>
> http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f39.shtml
>
> ive tried clearing the neighbors, but the level-2 routes dont get
> advertised
> to the level-1 routers. i only get the 0.0.0.0 route.
>
> any ideas?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S, SP), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net