Re: FR-VLAN Interworking not working

HI guys,

I've verified all that and unfortunately bridging does not work. I have
converted this to routed and it's working fine. No bridging on CE1 and the 2
PEs are interworking IP.

On Wed, Jan 13, 2010 at 6:11 AM, Satinder Singh <satinder.iitd_at_gmail.com>wrote:

> Hi Service provider,
>
> To me some configuration missing/inconsistency look on the PE router and
> CE1 router.
>
> Few of them are.
>
> One the CE1 i am not able to find the interface with address 10.1.12.1/24
> so to which interface address you are pinging from CE2... pls clarify the
> same.
>
> On the PE1 and PE2 in pseudowire class remove the " interworking ethernet"
> and add " interworking ip" for interworking to work.
>
> In addition it is recoomended to add "ip local interfac address <address>"
> in the pseudowire class.
>
> Pls check and let me know if it is working.
>
> Thanks
> Satinder
>
> On Wed, Jan 13, 2010 at 12:37 AM, Service Provider <
> service.providersa_at_gmail.com> wrote:
>
>> Hi all
>>
>> I have setup FR-VLAN Interworking and my l2 tunnel is up but cannot ping
>> between CE sites.
>>
>>
>> CE1-----FRSW-------PE1-----------------PE2---------------------VLAN100--------------------CE2
>>
>> Configs below, please help....tx.
>>
>> CE1#
>> CE1#sh run
>> Building configuration...
>>
>> Current configuration : 1912 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname CE1
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> enable password cisco
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> no mpls traffic-eng auto-bw timers frequency 0
>> bridge irb
>> !
>> !
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> no clns route-cache
>> !
>> interface Serial1/0
>> no ip address
>> no ip directed-broadcast
>> encapsulation frame-relay
>> serial restart-delay 0
>> no clns route-cache
>> frame-relay map bridge 101 broadcast
>> frame-relay map bridge 100 broadcast
>> no frame-relay inverse-arp
>> bridge-group 1
>> !
>> interface Serial1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface BVI1
>> ip address 10.10.10.1 255.255.255.0
>> no ip directed-broadcast
>> no clns route-cache
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> bridge 1 protocol ieee
>> bridge 1 route ip
>> !
>> line con 0
>> exec-timeout 0 0
>> privilege level 15
>> logging synchronous
>> stopbits 1
>> line aux 0
>> exec-timeout 0 0
>> privilege level 15
>> stopbits 1
>> line vty 0 4
>> password cisco
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>> ce2#
>> ce2#sh run
>> Building configuration...
>>
>> Current configuration : 810 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname ce2
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> !
>> !
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> !
>> interface FastEthernet1/0
>> no ip address
>> no ip directed-broadcast
>> duplex half
>> speed auto
>> !
>> interface FastEthernet1/0.100
>> encapsulation dot1Q 100
>> ip address 10.1.12.2 255.255.255.0
>> no ip directed-broadcast
>> !
>> interface FastEthernet1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> duplex half
>> speed auto
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> logging synchronous
>> stopbits 1
>> line aux 0
>> stopbits 1
>> line vty 0 4
>> login
>> !
>> no cns aaa enable
>> end
>>
>> PE1#sh run
>> Building configuration...
>>
>> Current configuration : 2311 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname PE1
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> enable password cisco
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> mpls label protocol ldp
>> no mpls traffic-eng auto-bw timers frequency 0
>> frame-relay switching
>> !
>> !
>> pseudowire-class l2inter
>> encapsulation mpls
>> interworking ethernet
>> !
>> pseudowire-class INTERWORKING
>> encapsulation mpls
>> interworking ethernet
>> !
>> !
>> interface Loopback0
>> ip address 1.1.1.1 255.255.255.255
>> no ip directed-broadcast
>> no clns route-cache
>> !
>> interface Loopback1
>> no ip address
>> no ip directed-broadcast
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> no clns route-cache
>> !
>> interface Serial1/0
>> no ip address
>> no ip directed-broadcast
>> encapsulation frame-relay
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/1
>> ip address 150.1.12.1 255.255.255.0
>> no ip directed-broadcast
>> mpls label protocol ldp
>> tag-switching ip
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> router ospf 1
>> router-id 1.1.1.1
>> log-adjacency-changes
>> network 1.1.1.1 0.0.0.0 area 0
>> network 13.13.13.1 0.0.0.0 area 0
>> network 0.0.0.0 255.255.255.255 area 0
>> !
>> ip classless
>> !
>> !
>> connect FR-VLAN-IW Serial1/0 101 l2transport
>> xconnect 2.2.2.2 100 pw-class INTERWORKING
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> privilege level 15
>> logging synchronous
>> stopbits 1
>> line aux 0
>> exec-timeout 0 0
>> privilege level 15
>> stopbits 1
>> line vty 0 4
>> password cisco
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>>
>> pe2#sh run
>> Building configuration...
>>
>> Current configuration : 1997 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname pe2
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> !
>> !
>> pseudowire-class l2inter
>> encapsulation mpls
>> interworking ethernet
>> !
>> !
>> interface Loopback0
>> ip address 150.1.2.2 255.255.255.255
>> no ip directed-broadcast
>> !
>> interface Loopback2
>> ip address 2.2.2.2 255.255.255.255
>> no ip directed-broadcast
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> !
>> interface Serial1/0
>> ip address 150.1.12.2 255.255.255.0
>> no ip directed-broadcast
>> mpls label protocol ldp
>> tag-switching ip
>> serial restart-delay 0
>> !
>> interface Serial1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface FastEthernet2/0
>> no ip address
>> no ip directed-broadcast
>> no keepalive
>> duplex half
>> speed auto
>> !
>> interface FastEthernet2/0.100
>> encapsulation dot1Q 100
>> no ip directed-broadcast
>> xconnect 1.1.1.1 100 pw-class l2inter
>> !
>> interface FastEthernet2/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> duplex half
>> speed auto
>> !
>> router ospf 1
>> log-adjacency-changes
>> network 0.0.0.0 255.255.255.255 area 0
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> logging synchronous
>> stopbits 1
>> line aux 0
>> stopbits 1
>> line vty 0 4
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Satinder Singh
> mobile 09980075998

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 13 2010 - 07:12:55 ART