Re: ospf issue

Thanks but I have checked all of them they were fine
I have just got the same network statement in the new process and it is
working

Regards
Aashish Kapoor

On Tue, Sep 29, 2009 at 8:13 PM, Divin Mathew John <divinjohn_at_gmail.com>wrote:

> Check the following
>
> 1) Area configured on both sides shud match
> 2) Stub flag shud match
> 3) Timers shud Match
> 4) Dr/BDR Election type shud match
> 5) MTU shud Match
>
>
> On Tue, Sep 29, 2009 at 8:04 PM, aashish kapoor <operationccie_at_gmail.com
> > wrote:
>
>> Hi Group,
>>
>> I have faced one issue with ospf.
>> R1 ------ R2
>> running point to point ospf were not forming ospf adjacency
>> I have checked every possible cause and turned debug on only message is
>> got
>> was that the far end in dead
>> I have restarted ospf process..... have remove and added the network
>> statement again but it did not worked.
>>
>> Then I have removed network statement from the existing ospf process and
>> created a new ospf process and added this statement into it. It worked and
>> formed adjacency.
>>
>> Please advise what could be possible cause.
>>
>> Regards
>> Aashish Kapoor
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
>
> Sent from Karnataka, India
> Vilhjalmur Stefansson <http://www.quotationspage.com/quote/1459.html> -
> "What is the difference between unethical and ethical advertising? Unethical
> advertising uses...

Blogs and organic groups at http://www.ccie.net
Received on Tue Sep 29 2009 - 20:20:47 ART