If you ping the other end, no packet loss?
What kind of link is between the 2 routers?
Could you post the OSPF and interface configuration of both routers.
Have you erased the configs of both routers and reloaded them both and then
reconfigured this?
-- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer IPexpert, Inc. URL: http://www.IPexpert.com On Tue, Sep 29, 2009 at 4:50 PM, aashish kapoor <operationccie_at_gmail.com>wrote: > Thanks but I have checked all of them they were fine > I have just got the same network statement in the new process and it is > working > > Regards > Aashish Kapoor > > On Tue, Sep 29, 2009 at 8:13 PM, Divin Mathew John <divinjohn_at_gmail.com > >wrote: > > > Check the following > > > > 1) Area configured on both sides shud match > > 2) Stub flag shud match > > 3) Timers shud Match > > 4) Dr/BDR Election type shud match > > 5) MTU shud Match > > > > > > On Tue, Sep 29, 2009 at 8:04 PM, aashish kapoor < > operationccie_at_gmail.com > > > wrote: > > > >> Hi Group, > >> > >> I have faced one issue with ospf. > >> R1 ------ R2 > >> running point to point ospf were not forming ospf adjacency > >> I have checked every possible cause and turned debug on only message is > >> got > >> was that the far end in dead > >> I have restarted ospf process..... have remove and added the network > >> statement again but it did not worked. > >> > >> Then I have removed network statement from the existing ospf process and > >> created a new ospf process and added this statement into it. It worked > and > >> formed adjacency. > >> > >> Please advise what could be possible cause. > >> > >> Regards > >> Aashish Kapoor > >> > >> > >> Blogs and organic groups at http://www.ccie.net > >> > >> _______________________________________________________________________ > >> Subscription information may be found at: > >> http://www.groupstudy.com/list/CCIELab.html > >> > >> > >> > >> > >> > >> > >> > >> > > > > > > -- > > > > Sent from Karnataka, India > > Vilhjalmur Stefansson <http://www.quotationspage.com/quote/1459.html> - > > "What is the difference between unethical and ethical advertising? > Unethical > > advertising uses... > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html Blogs and organic groups at http://www.ccie.netReceived on Tue Sep 29 2009 - 17:33:04 ART
This archive was generated by hypermail 2.2.0 : Sun Oct 04 2009 - 07:42:04 ART