Re: ospf issue

Check the following

1) Area configured on both sides shud match
2) Stub flag shud match
3) Timers shud Match
4) Dr/BDR Election type shud match
5) MTU shud Match

On Tue, Sep 29, 2009 at 8:04 PM, aashish kapoor <operationccie_at_gmail.com>wrote:

> Hi Group,
>
> I have faced one issue with ospf.
> R1 ------ R2
> running point to point ospf were not forming ospf adjacency
> I have checked every possible cause and turned debug on only message is got
> was that the far end in dead
> I have restarted ospf process..... have remove and added the network
> statement again but it did not worked.
>
> Then I have removed network statement from the existing ospf process and
> created a new ospf process and added this statement into it. It worked and
> formed adjacency.
>
> Please advise what could be possible cause.
>
> Regards
> Aashish Kapoor
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sent from Karnataka, India
Vilhjalmur Stefansson <http://www.quotationspage.com/quote/1459.html>  -
"What is the difference between unethical and ethical advertising? Unethical
advertising uses...
Blogs and organic groups at http://www.ccie.net