Re: lab 24 volume1 v11

How are these connected? Can you give me a show cdp neighbors on these
devices?

On Tue, Jul 21, 2009 at 3:03 PM, L. Jankok <ljankok_at_gmail.com> wrote:

> Dear list,
>
> I have in the weekends proctorlabs booked but during the week days I
> don't have 8 hours to spend so I
> use the dynamips file provided by ipexpert. My platform is macosx intel.
> Today I wanted to redo lab 24 I did last week on proctorlbabs since I
> had an issued with this lab.
>
> I have an annoying problem with dynamips and since this is my only
> option during the weeks it is
> pretty annoying.
>
> Basically the problem boils down to a layer 2 issue between cat1 and r4
>
> Cat3550-1#show ip arp
> Protocol Address Age (min) Hardware Addr Type Interface
> Internet 150.100.40.4 8 c200.0708.0000 ARPA Vlan40
> Internet 150.100.40.11 - c20d.070b.0000 ARPA Vlan40
> Cat3550-1#ping 150.100.40.4
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 150.100.40.4, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> Cat3550-1#
>
> 4#show ip arp
> Protocol Address Age (min) Hardware Addr Type Interface
> Internet 150.100.40.4 - c200.0708.0000 ARPA
> FastEthernet0/0
> Internet 150.100.40.11 0 Incomplete ARPA
> Internet 150.100.41.4 - c200.0708.0001 ARPA
> FastEthernet0/1
> R4#
>
> I have tried setting the speed and duplex, reloading both instances,
> deleting and making
> the vlan, shutting down the ports and up again, setting no switchport
> on f1/4.. nothing
> really helped for the problem still persists..
>
> Your help is appreciated.
>
> Cheers,
>
> LJ
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net